RoofBot - Roof Calculator Roof-bot calculator
Need help? Call us on 01494 461711
Free delivery & toolkit

on orders over £350 ex VAT

20 year warranty
Life expectancy

free downloadable warranty

Secured payments

Encrypted With SSL

Laying Lineflex

A guide to laying Lineflex Fleece Backed EPDM membrane.

Download PDF
Step 1

The deck must be dry and clean before laying the membrane, position rubber and mark deck as shown 100mm from the edge of the membrane.

Step 2

Roll membrane back and roller apply water-based adhesive to the deck up to the marked line at a rate of 5 litres per 15m2.

Step 3

Mate rubber to the adhesive and sweep out any air bubbles, overlap the next piece of rubber by 50mm. Repeat process.

Step 4

Seal the rubber with a hot air welder using a silicone roller at a rate of 2.5m per minute at 220 degrees (level 4).

Roofus, your friendly roof assistant

Looking for help or advice?

Click on our friendly RoofBot to help you work out what you need for your DIY TRC - Techno Rubber project, just input your dimensions, answer some simple questions and let RoofBot do the rest. If you still need assistance, don't hesitate to contact us at info@rubba-seal.co.uk or 01494 461711.

Get in touch RoofBot - Roof Calculator

© 2024 Avenir Roofing Ltd t/a Rubba-Seal   •  All rights reserved
Registered in England and Wales: 04710777  •  
VAT registration number: 527 2382 48

Web design & development by Fifty Digital Logo