Free delivery & toolkit

on orders over £350 ex VAT

Life expectancy

free downloadable warranty

Secured payments

Encrypted With SSL

Techno Guides

Laying Membrane Edge Trims Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles External Corner (Skylight / Upstand) Internal Corner Pipeseal Seam / Join Rainwater Outlet Horizontal Rainwater Outlet

Lineflex Guides

Lineflex Heat Weld Laying Lineflex Laying Lineflex With Spray Adhesive Laying Lineflex With Mechanical Fixings Edge Trim Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles External Corner Internal Corner Pipe Seal Horizontal Rainwater Outlet Butt Join Rainwater Outlet Horizontal Rainwater Outlet

Laying Membrane

Step by step guide on laying our Techno EDPM Membrane to your next rubber roofing project.

Download PDF

Step 1

Ensure deck is dry and clean.

Step 2

Position membrane on the roof and allow to relax for 30-45 minutes, slightly longer in colder temperatures.

Step 3

Fold back one half of the rubber and apply an even coat of water-based adhesive to the deck using roller and sleeve. For best results, it is essential that the water based deck adhesive is thoroughly stirred with a paddle stirrer prior to use.

Step 4

Mate the rubber to the adhesive immediately and use a soft broom to sweep out any air bubbles.

Step 5

Repeat the process for the other side.

Step 6

Thoroughly sweep roof.

Looking for help or advice?

Click on our friendly RoofBot to help you work out what you need for your DIY TRC - Techno Rubber project, just input your dimensions, answer some simple questions and let RoofBot do the rest. If you still need assistance, don't hesitate to contact us at info@rubba-seal.co.uk or 01494 461711.

Get in touch RoofBot - Roof Calculator

RubbaSeal EPDM

Available cut to size in 045 (1.2mm) and 060 (1.52mm)

Same Day Dispatch

Order before 2:30pm for same day despatch
(working days only)

RubbaTrim

Now available in black, white and anthracite with clips and fixings supplied

Training

Training for EPDM contractors is available from only £89.00+VAT

Web design & development by