RoofBot - Roof Calculator Roof-bot calculator
Need help? Call us on 01494 461711
Free delivery & toolkit

on orders over £350 ex VAT

20 year warranty
Life expectancy

free downloadable warranty

Secured payments

Encrypted With SSL

Wall Trim Flashing

A guide to installing a wall trim flashing.

Download PDF
Step 1

Thoroughly clean the wall, chase and rubber.

Step 2

Apply a thin coat of contact adhesive to the rubber and the wall.

Step 3

Once touch dry, starting at the bottom, carefully mate the surfaces together. Smooth by hand and silicone roller.

Step 4

Trim membrane.

Step 5

Position a piece of 9” QuickSeam Formflash or a Detail Kit as shown and mark the perimeter, allowing an extra 1cm.

Step 6

Apply Quick Prime plus to the marked area using a Quick Scrubber pad and handle, allow primer to dry.

Step 7

Peel back a section of backing paper and starting from the top, slowly work downwards as shown.

Step 8

Apply a gentle heat source to the corner if needed.

Step 9

Thoroughly roller with Silicone and Penny Rollers.

Step 10

Insert wall trim into chase and secure at 600mm centres with the supplied fixings. Raw plugs are not needed if a 5.5mm masonry drill bit is used.

Step 11

Thoroughly seal chase with Wall Mastic.

Roofus, your friendly roof assistant

Looking for help or advice?

Click on our friendly RoofBot to help you work out what you need for your DIY TRC - Techno Rubber project, just input your dimensions, answer some simple questions and let RoofBot do the rest. If you still need assistance, don't hesitate to contact us at info@rubba-seal.co.uk or 01494 461711.

Get in touch RoofBot - Roof Calculator

© 2024 Avenir Roofing Ltd t/a Rubba-Seal   •  All rights reserved
Registered in England and Wales: 04710777  •  
VAT registration number: 527 2382 48

Web design & development by Fifty Digital Logo