Free delivery & toolkit

on orders over £350 ex VAT

Life expectancy

free downloadable warranty

Secured payments

Encrypted With SSL

Techno Guides

Laying Membrane Edge Trims Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles External Corner (Skylight / Upstand) Internal Corner Pipeseal Seam / Join Rainwater Outlet Horizontal Rainwater Outlet

Lineflex Guides

Lineflex Heat Weld Laying Lineflex Laying Lineflex With Spray Adhesive Laying Lineflex With Mechanical Fixings Edge Trim Gutter Trim External Edge Corner Wall Trim Flashing Under Tiles Onto Tiles External Corner Internal Corner Pipe Seal Horizontal Rainwater Outlet Butt Join Rainwater Outlet Horizontal Rainwater Outlet

Laying Lineflex With Spray Adhesive

A guide to laying Lineflex Fleece Backed EPDM membrane using spray contact adhesive.

Download PDF

Step 1

The deck must be dry and clean before laying the membrane. Spray apply contact adhesive to both deck and fleece and allow to touch dry.

Step 2

Carefully mate the membrane onto the adhesive and repeat the process on the other side.

Step 3

Carefully position adjoining sheet, overlap by 50mm and adhere as before.

Step 4

Seal the rubber with a hot air welder using a silicone roller at a rate of 2.5m per minute at 220 degrees (level 4).

Looking for help or advice?

Click on our friendly RoofBot to help you work out what you need for your DIY TRC - Techno Rubber project, just input your dimensions, answer some simple questions and let RoofBot do the rest. If you still need assistance, don't hesitate to contact us at info@rubba-seal.co.uk or 01494 461711.

Get in touch RoofBot - Roof Calculator

RubbaSeal EPDM

Available cut to size in 045 (1.2mm) and 060 (1.52mm)

Same Day Dispatch

Order before 2:30pm for same day despatch
(working days only)

RubbaTrim

Now available in black, white and anthracite with clips and fixings supplied

Training

Training for EPDM contractors is available from only £89.00+VAT

Web design & development by