There are 0 items in your cart |
order in 5611 seconds
on orders over £250 ex VAT
free downloadable warranty
Encrypted With SSL
Step by step guide on installing a rainwater outlet into your next EPDM project.
Download PDF
Place rainwater outlet through the pre-cut hole and mark around it using a crayon or similar.
Shop EPDM Drain Outlets
Prime the underside of the rainwater outlet and 1cm beyond the marked area on the rubber using a quick scrubber pad and handle. Allow both surfaces to dry.
Mate the surfaces together and compress with silicone roller.
Round the corners of the 12” formflash (Rainwater flashing kit) with scissors and neatly position over outlet. Mark the perimeter with crayon.
Prime the rubber and outlet using the quick scrubber pad and handle and extend primer beyond the crayon line by 2cm.
Once touch dry, neatly position the 12" formflash and carefully remove the backing paper. Roller firmly in place and use a sharp blade to carefully cut out the hole.
Click on our friendly RoofBot to help you work out what you need for your DIY Firestone RubberCover project, just input your dimensions, answer some simple questions and let RoofBot do the rest. If you still need assistance, don't hesitate to contact us on LiveChat, info@rubba-seal.co.uk or 01494 461711.
© 2021 Avenir Roofing Ltd t/a Rubba-Seal • All rights reserved
Registered in England and Wales: 04710777 •
VAT registration number: 527 2382 48
Web design & development by 
